Arduino CW Encoder (CW Keyer)
In some Arduino, HAM related project books, we found some designs for a memory CW keyer for using in Contests or so.
We decided to make use of the design of Glen Popiel. KW5GP.
Basis of his design was making use of a standard PS/2 Keyboard (PC). Handy if you are not be able to use CW the normal way via a Straight key or paddle… or other reasons…hi
Also this design makes use of the well known 20x4 display, 4 memory-
His design was described perfectly in one of his books.
But, We wanted more…..!
We wanted larger memory-
Also we noticed there was something strange with the 20x4 display.
Arduino Antenna Analyzer
In the November 2017, Issue of QST, there was a article published about this Antenna Analyzer project. Several members oft the Milford Amateur Radioclub have build already this project. Proof for us that is should work …hi..
The desgin is very nice. Its totally dedicated to all the Ham radio Amateur bands, from 160 mtrs to 10 Mtrs.
There is made use of a 3.5 Inch Graphical TFT Display.
All the scans and measurements can be saved on a SD memory-
Measurements are selective on each band separately and its possible to compare them after you have modified the antenna.
To use this Antenna Analyzer portal, its provided with a
9V rechargeable Lithium Battery next to a external DC power-
It was a challenge again to find a nice enclosure again…
I found a nice enclosure on Ebay for just a few Euro’s.
With some manual labour, we’ve got a t the end a nice design for this project.
To finish the Enclosure, we have searched for a Bezel for this display, but we didn't find it. For a moment we have thought to ask someone to make a design via a 3D printer, but that was much to expensive.
So we decided to make something ourselves.
How did it started….?
Its just like our Ham radio Hobby… When you have your Licence and once started to make QSO’s and doing some Experiments, you wanted more and more…
In February 2017 the VERON, Department Breda, organized a Arduino Workshop. In total 34 Hams take part and participated at these Arduino Workshop.
Han, PA0JEN and Edwin, PA7FRN did take care of the Workshop Program, Arduino parts, materials and documentation. Of course, there was also Homework to do and self-
Planned was a total of 4 evenings, but by the enthusiasm of the Attendees it was expanded to 6 evenings !
With lots of pleasure and enthusiasm we did this workshop and back home, we study and did some practice. And than… it happened…. :-
Unfortunately, after 6 weeks it was over and ended. But we wanted more and more of this…
Together with a HAM friend of mine,. Bert, PA1BM, who was also interrested in more, we decided to go on with more Ham related projects.
Via Ebay and Aliexpress we ordered some extra parts and materials and together we realised some nice Arduino Ham related Projects
Our First project
We decide to start with a easy project.
A Clock for in the Shack telling us Local and UTC time on a display.
O ja Yeah.. Also telling us Temperature and Humidity should be handy…hi…
Started with the original code, we expanded it all. We did later things and expanded the desigan with some new Modules. We named the project Hamshack Display.
The display gives you indication of: v
Arduino QTH Locator indicator using GPS
The basic information of our second project, was found in the VERON magazine of November 2015. In this issue, Hans, ON4CDU describes a nice Arduino project, using a GPS module and a Arduino Uno with some Arduino Code to calculate the HAM QTH Locator, based on the received card coordinates.
Our modifications :
We wanted to use a Arduino Nano instead of a Arduino Uno and we wanted a bigger, 20x4 display to display all the available information at once…
Also it must be possible to use it portable and not only connected to a DC power source.
The next 2 projects are CW oriented
For a long time we had the wish, to build a CW decoder. Just to give me some help by receiving CW signals. I have not operated CW for a long time. So I am a bit rusty…hi..
But also to have a tool to decode CW signal.
Also a CW Memory keyer to operate CW from a standard PC Keyboard. Nice to use for CW practice, but also as a tool for if the straight key is not suitable any more.
And of course a nice toool for Ham’s who have no knowledge to practice CW with a key.
Arduino CW Decoder
Looking for a suitable design on the Internet, we’ve found many projects. One even more nicer than the other one…
At the end we can say, its was a nice project to do. Its a very use full device that we already have used many times in our Antenna experiments
Jack Purdum, W8TEE
Glen Popiel, KW5GP
We searched on Internet and several Arduino For a for a usable project.
Of Course, just having done a Arduino Workshop, don’t make you a real Programmer, but you can read the code and make some changes or add some other things to the program, just as you like.
And we did find a small project to begin with. There was only one problem : Its was wrotten in Italian Language…hi..
With the help of Google translator, we translated the code to English.
Afther that was done, we started to build the project on the breadboard
We added some extra code to switch automaticaly from Summer-
It was a very nice project to start with and using the knowledge of the Arduino Workshop in practice. We learned a lot of the several Time, temperature and Barometric modules in practice. Not everything you find on the Internet is usable.
Cheap will not always say the specifications are correct !!
In fact, its a easy project. Only a few parts of hardware, a Arduino and a GPS module are used and the rest is software.
But, of course, we wanted different again….
Afther modification the display tells us:
Besides the designs, found in Books for Ham related Arduino Projects (see Chapter : Literature below), we found again a nice looking design in the VERON magazine of November 2015.
This project was based on a design from Bud, WB7FHC, bud modified with some extra features by PA0JBG. And by the way : There was a PCB available.!
There was a lot of information available, and many other Ham’s had already build this CW decoder. Such’s thins helps to make a decision !
In this design they did make use of a 20x4 display. We find this better than a small 16x2 display.
Included in this design was a LM567 circuit for tone detection and bandpass filtering.
That was one of our wishes. We wanted to decode signals between 600 and 1000 Hz with a bandwidth of 250 Hz,
PA0JBG has added some extra features to the original design. We’ve all tested them, but not added them all.
For the precision tone-
At he end the result was a perfect CW decoder which gives us a lot of help bij CW decoding on HF, especially when propagation and conditions are very poor.
We did make a direct contact with Glen, KW5GP via e-
Glen told us about the limitations in memory of the Arduino Nano or Uno controller. He also recognised the shortcomings of the 20x4 display. Is has to do with the internal hardware configuration of this display.
So… it should be difficult to change this..??
Again, a challenge to overcome….
In the meantime we had learned a lot more of the Arduino Code than in the beginning…We analysed the limitations of the Arduino Controllers, and decided to make use of al lager Arduino Mega2560 controller.
This version of Arduino has much more memory available. And we did modify the Code of one of the Library's, so that we could make use of this larger memory.
Professional memory Keyer
Due to the extra capacity of the Arduino Mega260 controller, we’ve got a Memory CW keyer with 8 memory-
It’s now possible to pre-
Ideal for CW contests.
And, with the help of Edwin, PA7FRN, we’ve managed to cure the strange behaviour of the 20x4 display too !
One project ready, another project to come….hi
One of our wishes, was to have a HF Antenna Analyzer. Commercially these tools are very expensive, and its nicer to build your own…
So when we came back from our Summer-
In consultation with my Friend, Bert, PA1BM, we decided to make this our next project.
We searched several Chinese Websites to find the needed parts en ordered them together.
At the end of October 2017, most of the parts arrived and we started to assemble the PCB.
There are many books available about Arduino Ham Related projects
A big advantage is the fact that the described project in practice really works. (most times….hi)
Of course we bought some books after we finished the Workshop. But also on the Internet there is lost of information available. Lots of E-
Some books and Authors are :
During our project fases of the CW Keyer and the Antenna Analyzer, we had a direct e-
Both Authors publish on regular bases in QST and other magazines issued bij the ARRL